20x25x1 furnace filter: actual size, MERV choice and where to buy
A 20x25x1 furnace filter is a nominal size. The cut size is 19.5 x 24.5 x 0.75 inches. Here is how nominal and actual sizes differ, how to pick a MERV rating, and how often to change it.
Quick facts
Nominal size (the name you shop by)
20 x 25 x 1 inches
Actual size (as listed by Filterbuy)
19.5 x 24.5 x 0.75 inches
Replacement interval
Filterbuy generally recommends every 90 days. It suggests every 6 weeks with asthma or allergies in the home, every 2 months with pets, and every 2 to 3 months with young children.
Price
Not shown. Check the current price at the seller.
Nominal size vs actual size
The name 20x25x1 is the nominal size, which is rounded. Filterbuy lists the actual size as 19.5 x 24.5 x 0.75 inches. Filterbuy says every manufacturer cuts filters slightly smaller than the nominal size so they seat without binding.
Inches
Nominal (name on the box)
20 x 25 x 1
Actual (cut size, per Filterbuy)
19.5 x 24.5 x 0.75
Choosing a MERV rating
MERV reports how well a filter captures particles between 0.3 and 10 microns. It comes from a test method developed by ASHRAE. The higher the number, the better the filter captures particles of specific sizes (US EPA).
Average capture efficiency by particle size (US EPA table, selected ratings)
MERV
0.3-1.0 µm
1.0-3.0 µm
3.0-10.0 µm
MERV 8
not rated
20% or more
70% or more
MERV 11
20% or more
65% or more
85% or more
MERV 13
50% or more
85% or more
90% or more
EPA says that if you upgrade, choose a filter rated at least MERV 13, or as high as your system fan and filter slot can accommodate. It adds that you may need an HVAC technician to decide what your system can take.
Filterbuy's comparison chart (a seller's chart, not a lab result) says MERV 8 covers dust, dust mites, pollen, mold, lint and dander. It says MERV 11 adds smoke and smog, and MERV 13 adds bacteria.
Higher ratings can restrict airflow in some systems. Check your furnace or air handler manual for the highest rating it allows.
Where to buy this size
We may earn a commission if you buy through these links. Disclosure
Filterbuy 20x25x1 (model AFB20x25x1M8 and other MERV versions)
What the seller says about fit
Filterbuy lists the actual size as 19.5 x 24.5 x 0.75 inches and sells this size in MERV 8, 11, 13 and an odor-eliminator version.
Check the size printed on the frame of your current filter. It usually shows the nominal size (for example 20x25x1) and sometimes the actual size.
Measure the filter slot or your old filter's length, width and thickness. The actual size should be a little smaller than the nominal size so it slides in.
Check that the airflow arrows on the new filter point toward the furnace blower, the same direction as on the old one.
If your old filter is a different thickness (for example 4 inches), you need a different size page. This page is for 1-inch filters.
Replacement interval
Filterbuy generally recommends every 90 days. It suggests every 6 weeks with asthma or allergies in the home, every 2 months with pets, and every 2 to 3 months with young children.
Things to watch
Brands can differ by a quarter inch or so on the actual size. Compare the actual size listed by the seller with your slot, not only the nominal size.
Higher MERV is not automatically better for your system. EPA says to use MERV 13 or as high a rating as your system fan and filter slot can accommodate, and that you may need an HVAC technician to decide.
Facts on this page come from the pages below. Last checked 2026-11-18. Compatibility statements are attributed to whoever made them. If a source did not state something, we left it out.